|
|
3
|
Sector
|
Minerals Tenders
|
Tender Value
|
5.07 Lakh approx.
|
Location
|
Jharkhand Tenders
|
Ref.No
|
72207222
|
Closing Date
|
13 - Jun - 2024
|
12 Days to go
|
View Tender Details
|
|
Drilling of Five Inch Dia Bore Hole, Providing and Fixing of Five Inch Dia PVC Casing Pipe., Supply of Accessories Thirty Two Mm Valve Alto., Thirty Two Mm Non Return Valve Alto, Thirty Two Mm Ms Clamp to Hold Pipe, Gi Nipple Thirty Two Mm., Gi Bend Thirty Two Mm., Borewell Cover of Size Five Inch., Pressure Gauge, Pve Tape 02 Roll Taplon Tape 10 Roll M Seal Twenty Packet Etc. All Complete, Installation Charge of Pump and Above Item in Position Charge., Supply of Gi Pipe Including Gi Union Elbow Socket Reducer of Pipe Line Make Jindal Or Medium Size One Inch Dia., Supply of Gi Pipe Including Gi Union Elbow Socket Reducer of Pipe Line Make Jindal Or Medium Size of Three Fourth Inch Dia., Supply of Gi Pipe Including Gi Union Elbow Socket Reducer of Pipe Line Make Jindal Or Medium Size of Five Inch Dia., Providing and Fixing of Valve Size Three Fourth Inch Dia, Providing and Fixing of Valve Size Half Inch Dia., Laying Single Layer Brick Flat Soling with Over Brunt Picked Jhama Bricks Including Preparing and Leveling the Bed and Filling the Joints with Lcoally Available Coarse Sand After Dismantling Old One., Making Platform Withside Brick Wall One Side 200 Mm for Water Filling Are with Anti Skid Vetrified Floor Tiles Size 300 to 150 Up to a Height of 900 Mm Over Brick Wall for Fixing Stand Pint All Complete No Extra Payment Will Be Made for Sidebrick Wall and Drain., Providing and Applying with Synthetic Enamel Paint Two Or More Coats with Approved Brand and Shade Ready Mixed Paint Including Primer as Directed By Manufacture with a Monogrammed of Ucil and Date of Repairing., Installation of Two Hp Submersible Auto Run and Stop Dc Ac Pump Motor Waareodoo Wp of Stainless Steel Suitable for Minimum One Hundred and Twenty Five to One Hundred and Fifteen Mm Borewell Operating Head Sixty Meters Discharge Rate Minimum Two Thousand Lph with Lowering Upto Sixty Meter Thirty Two Mm Dia Upvc Schedule Eithty Column Pipe and Twenty Three Point Five Sqm Three Core Flat Submersible Cable Including Monil Polucrystaliune Pv Array Nine Hundred Mounted on Suitable Direction to Optimize Panel Uses and Withstand the Wind Pressure Up to Two Hundred Km Ph and Mainkg Suitable Arrangements to Operate Hand Pump Manually in the Same Bore When There is No Soler Power Including Five Years Warranty Against Defects in Materials and Workmanship with Locking Arrangements of Switchboard All Complete., Installation and Fixing of Push Cock, Supply and Fitting of Hot Dip Galvanized Steel Staging Composit Structure, Hdpe Water Tank Isi Make 1000 Ltrs. Capacity with Cover and Locking Arrangement.. Qty : 727
|
|
|
4
|
Sector
|
Railways Transport Services Tenders
|
Tender Value
|
N.A.
|
Location
|
Jharkhand Tenders
|
Ref.No
|
72203290
|
Closing Date
|
12 - Jun - 2024
|
11 Days to go
|
View Tender Details
|
|
Supply of 50 ton capacity hydraulic jack with inbuilt ( integral) pump, safety lock nut, closed height 325 mm, hyd. lift 150 mm, extended height 475 mm, ram dia 100 mm or above, body dia 198 mm or above, base size 240 x 100 sq mm, approx weight 70 kg #*. 50 ton capacity hydraulic jack with inbuilt ( integral) pump, safety lock nut, closed height 325 mm, hyd. lift 150 mm, extended height 475 mm, ram dia 100 mm or above, body dia 198 mm or above, base size 240 x 100 sq mm, approx weight 70 kg with all accessories, tested to 20% overload. nb: load test certificate from a government approved test lab to be submitted along with the material. [ warranty period: 30 months after the date of delivery ]
|
|
|
5
|
Sector
|
Minerals Tenders
|
Tender Value
|
N.A.
|
Location
|
Jharkhand Tenders
|
Ref.No
|
71548766
|
Closing Date
|
11 - Jun - 2024
|
10 Days to go
|
View Tender Details
|
|
Supply of Mbe Slurry Pump Spares, Vasa Hd 302-50 (hc), Casing (hc), Part No.: 198256-m1", Impeller (hc), Part No.: 2-b22-763, Inlet (hc), Part No.: 198258-m1, Wear Plate (hc), Part No.: 110059-m2, Box Housing, Part No.: 211930-1, Gland, Part No.: 72002 - a, Shaft Sleeve, Part No.: 148200-4, Lantern Ring, Part No.: 110144-1, Frame, Part No.: 110140-m2, Motor Bed Plate, Part No.: 202485-m1, Shaft , Part No.: 2-b22-731, Shaft with Bearing Housing, Part No.: 2-b22-732, Guard Lower Part, Part No.: 195370-m2, Guard Upper Part, Part No.: 195370 -m3, Oil Seal 48/62/8, Part No.: 956049, Bearing Housing Cover (de), Part No.: 148188-1, Bearing Housing Cover (nde), Part No.: 148187-1, Bearing Housing, Part No.: 148186-1, Distance Ring, Part No.: 180623-1, Casing (hc), Part No.: 109859-m1", Impeller (hc), Part No.: 2-b22-704, Inlet Liner (hc), Part No.: 109860-m1, Inlet (ci), Part No.: 92745-a, Box Housing, Part No.: 211787-1, Gland, Part No.: 3-b22-65-m1, Shaft Sleeve, Part No.: 180403-2, Lantern Ring, Part No.: 101618-1, Frame, Part No.: 101679 - M1, Motor Bed Plate, Part No.: 101681 -m1, Shaft , Part No.: 1-b22-885, Shaft with Bearing Housing, Part No.: 2-b22-705, Guard Lower Part, Part No.: 195403-m2, Guard Upper Part, Part No.: 195382 -m3, Oil Seal 65/85/10 , Part No.: 953061, Plug 1/2"bsp, Part No.: 953439, Bearing Housing Cover (de), Part No.: 92757-a, Bearing Housing Cover (nde), Part No.: 92756-a, Distance Ring, Part No.: 180631-1, Lock Washer Mb13, Part No.: 954128, Lock Nut Km13, Part No.: 954177, Deflector Ring, Part No.: 92755-a, Bearing Housing, Part No.: 101848-2, Oil Seal 75/95/10 , Part No.: 953325, Oil Seal 60/80/8, Part No.: 950200, Casing (hc), Part No.: 109859-m1", Impeller (hc), Part No.: 1-b22-739, Inlet Liner (hc), Part No.: 109860-m1, Inlet (ci), Part No.: 92745-a, Box Housing, Part No.: 211787-1, Gland, Part No.: 3-b22-65-m1, Shaft Sleeve, Part No.: 180403-2, Lantern Ring, Part No.: 101618-1, Frame , Part No.: 101679 - M1, Motor Bed Plate, Part No.: 101681 -m1, Shaft , Part No.: 1-b22-885, Shaft with Bearing Housing, Part No.: 2-b22-705, Guard Lower Part, Part No.: 195403-m2, Guard Upper Part, Part No.: 195382 -m3, Oil Seal 65/85/10 , Part No.: 953061, Plug 1/2"bsp, Part No.: 953439, Bearing Housing Cover (de), Part No.: 92757-a, Bearing Housing Cover (nde), Part No.: 92756-a, Distance Ring, Part No.: 180631-1, Lock Washer Mb13, Part No.: 954128, Lock Nut Km13, Part No.: 954177, Washer, Part No.: 180095-1, Deflector Ring, Part No.: 92755-a, Bearing Housing, Part No.: 101848-2, Oil Seal 75/95/10 , Part No.: 953325, Oil Seal 60/80/8, Part No.: 950200, Split Outer Casing (front & Rear ) , Part No.: 196875-m3", Casing Liner (rl) Gsl, Part No.: 310200-m1, Casing Liner (rl) Ssl, Part No.: 310201-m1, Impeller (rl), Part No.: 1-b22-745, Wear Plate (rl), Part No.: 310203-m1, Box Housing, Part No.: 202368-1, Gland, Part No.: 2-b22-527, Shaft Sleeve, Part No.: 3-b22-320, Lantern Ring, Part No.: 202370-1, Frame , Part No.: 198431-m1, Shaft , Part No.: 1-b22-742, Shaft with Bearing Housing, Part No.: 2-b22-511, Distance Ring, Part No.: 202270-1, Oil Seal 90/120/12, Part No.: 952893, Plug 3/8" Bsp, Part No.: 954355, Bearing Housing Cover (de), Part No.: 92739-a, Bearing Housing Cover (nde), Part No.: 92728-a, Key 20x12-130 Lg, Part No.: 899020-130, Distance Ring, Part No.: 180630-1, Bearing Housing , Part No.: 101655-2, Washer, Part No.: 180095-2, Lock Washer Mb15, Part No.: 954132, Lock Nut Km15, Part No.: 954181, Deflector Ring, Part No.: 202269-1, Oil Seal 90/110/12 , Part No.: 953330, Oil Seal 70/90/10, Part No.: 950206, Split Outer Casing (front & Rear ) , Part No.: 195447-m2", Casing Liner (hc), Part No.: 210240-2, Impeller (hc) 3v, Part No.: 1-b22-799, Wear Plate (hc), Part No.: 210241-m2, Box Housing, Part No.: 202295-1, Gland, Part No.: 2-b22-529, Shaft Sleeve, Part No.: 4-b22-325, Lantern Ring, Part No.: 148247-1 , Frame , Part No.: 148243 - M1, Shaft , Part No.: 1-b22-744, Shaft with Bearing Housing, Part No.: 2-b22-512, Oil Seal 95/120/12, Part No.: 950075, Plug 1/2"bsp, Part No.: 953439, Bearing Housing Cover (de), Part No.: 93843-a, Bearing Housing Cover (nde), Part No.: 93842-a, Inlet Liner (hc), Part No.: 210242-m2, Distance Ring, Part No.: 180632-1, Key 22x14-160 Lg, Part No.: 899022-160, Deflector Ring, Part No.: 93844-a, Lock Nut Km18, Part No.: 954187, Lock Washer Mb18, Part No.: 954138, Oil Seal 105/130/12, Part No.: 950545, Oil Seal 85/110/12, Part No.: 953328, Casing (hc), Part No.: 198256-m1", Impeller (hc), Part No.: 2-b22-727, Inlet (hc), Part No.: 198257-m1, Wear Plate (hc), Part No.: 110059-m2, Bearing Housing, Part No.: 101603-a, Bearing Housing Cover (de), Part No.: 101604-a, Bearing Housing Cover (nde), Part No.: 110222-1, Deflector Ring, Part No.: 110223-2, Shaft , Part No.: 2-b22-768, Shaft with Bearing Housing, Part No.: 2-b22-767, Lock Nut Km13, Part No.: 954177, Distance Ring, Part No.: 101638-1, Lock Washer Mb13, Part No.: 954128, Oil Seal 60/80/8, Part No.: 950200, Oil S
|
|
|
6
|
Sector
|
Coal and Lignite Tenders
|
Tender Value
|
5.93 Million approx. / 59.39 Lakh approx.
|
Location
|
Jharkhand Tenders
|
Ref.No
|
72141411
|
Closing Date
|
11 - Jun - 2024
|
10 Days to go
|
View Tender Details
|
|
Supply of Rod Piston Assembly Bucket Cylinder, Fan, Kit Seal, Seal Kit (arm Cylinder), Fan Belt, Pulley, Stud, Adapter Fan to Pulley, Spacer Pain, Bracket Idle Pulley, Stud, Pulley Fan Centre, Generator Assy, Fan Belt, Pulley Center, Nut, Center Asm Fan, Seal Oil Crankshaft, Gasket Gear Case to Cover, Fan Blade, Controller, Compressor, Condensor, Tank Receiver, Hose Cooler, Hose, Pulley, Belt, Hose Cooler, Harness, Controller, Air Conditoner Unit, Controller, Operator Seat, Harness Wire, Unit Icx, Seal Kit Bucket Cyl Zx 650h. Qty : 84
|
|
|
|
8
|
Sector
|
Coal and Lignite Tenders
|
Tender Value
|
1.16 Million approx. / 11.68 Lakh approx.
|
Location
|
Jharkhand Tenders
|
Ref.No
|
72112045
|
Closing Date
|
08 - Jun - 2024
|
7 Days to go
|
View Tender Details
|
|
Supply of Finger Assembly, Liner 75 mm, Valve Insert, Piston Rod, TYRE COUPLING, VALVE SEAT, Wing valve, Helical Gear or Eccentric gear, Valve cover packing, Cup Bucket Packing GPS 75MM BUCKET, Safety valve, Cup Bucket holder, Wing valve plate, Gl Flange, Connecting Big end bush ID less 15mm, Cross head, Connecting small end bush, Piston rod gl nut, Liner cover plate, Liner cover packing, Helical gear pinion, Jack shaft with key, Connecting rod, Gudgeon pin, Tyre coupling flange, Suction flange, Housing Bearing, Eccentric, Gl Housing, Oil seal, Plate, Key, Fork, Piston Rod with Nut, Cup Bucket 75mm, Valve Guide, Spring Valve Assembly, Connecting Rod, Connecting Rod Bushing, Gudgeon Pin, Oil stop head, Bearing Cover, Bolt - BOQ GPS TSA 123 Qty : 793
|
|
|
|
10
|
Sector
|
Coal and Lignite Tenders
|
Tender Value
|
92.32 Thousand approx.
|
Location
|
Jharkhand Tenders
|
Ref.No
|
72060765
|
Closing Date
|
07 - Jun - 2024
|
6 Days to go
|
View Tender Details
|
|
Supply of Sliding Gear, Hyd Chuck Pinion, Chuck Jaw Nq, Shifter Fork, Hinge Plate T- Bolt, Hoisting Drum Clutch Brake Adjusting Screw, Hoisting Drum Clutch Brake Spring, Feed Control Valve, Hyd Pipes for Hyd Cylinder Chuck, Hyd Cylinder Piston Rod Gl Nut, Guide Rod Bush, Cluster Gear Shaft - Boq Rd Qty : 27
|
|
|